The Ross Double Planetary Mixer includes two blades that rotate on their own axes, while they orbit the mix vessel on a common axis. The blades continuously advance along the periphery of the vessel, removing material from the vessel wall and transporting it to the interior. After one revolution the blades have passed through the entire vessel, after three revolutions most materials have been mixed and after only 36 revolutions, the blades have contacted virtually the entire batch.

• Stainless Steel type 304 wetted parts polished to an 80 grit finish. All non-stainless steel exterior surfaces are coated with a high quality two-component paint.
• Change can design for use with multiple mix cans and Discharge Systems.
• Vertical lift design with air/oil hydraulic lift.
• Agitators driven by an explosion-proof inverter-duty motor. VFD drive provides variable speed operation and on/off operation of motor.
• Cast iron gearbox. Viton sealing O'Rings and Lip seals on stirrer shaft.
• Rectangular stirrer blades are provided.
• Dust tight hood isolates product from outside contaminants. Hood is easily removed providing access to upper gearbox area for simple maintenance and cleaning.
• Explosion proof limit switches prevent operation of the mixer when in the raised position or when the mix can is removed from the mixing position.
   

OPTIONAL FEATURES:

• Equipment designed to meet vacuum, sanitary,
  explosive, internal pressure, or any other special processing environment.

• Vacuum drying and solvent recovery systems are available.

• Carbon steel, stainless steel, hastelloy, titanium or aluminum.

• Motorized hydraulic lift with a self contained hydraulic pump/motor and raise/lower controls.

• Reverse lift design in which upper bonnet is stationary and the mix can is raised into the mixing position.

• Mechanical variable speed motor drive, higher horsepower and special drive configurations to satisfy high torque requirements.

• Fabricated in stainless steel with your choice of polished finishes and sealing arrangements.

•  Additional dust and liquid seal arrangements available.

• Stirrer blades: "HV" blades, finger type blades, augers, flight bars, custom designed agitators.

• Bottom scraper and self adjusting side wall scraper arm, supplied with replaceable scraper blades.

• Jacketed mix cans for heating or cooling,
  thermocouples for monitoring product temperature, discharge valves

• Hard chrome plating, electropolish and high polish finishes up to mirror finish. Coatings of Teflon, nylon, kynar, tungsten carbide, aluminum oxide and hastelloy.

• Choice of any size charge/sight port, supplied with a solid end cap, pyrex sight glass, or a light for viewing. Hinged charging ports are also available.

• Plus many more.........